Pools of Molten Metal

It is not easy to “melt” structural steel / iron. (Keep in mind, we're not talking about the temperature at which steel weakens and loses its structural integrity, we're talking about the temperature at which it is literally reduced to a liquid / molten state.)

To date, nobody has suggested the fires on 9/11 reached the required 2,800 degrees Fahrenheit needed to produce molten steel / iron. Why? Because just as steel / iron have a “maximum temperature” they can withstand before turning liquid, a typical building fire has “maximum temperatures” it is capable of producing. NONE of the known fuel sources burning in the buildings on 9/11 could have reached the required threshold.

As a matter of fact, the widely touted culprit of 9/11 (jet fuel) has a maximum burn temperature far lower than what is required to melt steel. (Jet Fuel's maximum burn temperature is less than 1,700 degrees Fahrenheit.) The other fuel sources, (Desks, carpet, paper, etc.) could have reached temperatures of up to 2,000 degrees Fahrenheit under ideal conditions. -Closer, but still nowhere near hot enough to create the widely reported "pools of molten steel." 

Because it is impossible for temperatures less than the melting point of steel to melt steel, we may reasonably conclude the following:

1) Something that "burns" much hotter than jet fuel, diesel fuel, desks, carpet, paper (and other office and building materials) must have been present (and active) in the WTC buildings; otherwise, there would have been no “molten metal.” ***Note: Physical samples of the (previously) molten metal have been retrieved from the WTC wreckage; the jury is no longer "out" on whether or not it existed.

2) Whatever was hot enough to cause the molten metal was also hot enough to cut through the steel support columns.

3) By deliberately ignoring this "smoking gun" physical evidence, the official account is a demonstrable fraud. 

 (References)

(-taken from The 1-Hour Guide to 9/11)